The history of the drum machine

The drum machine is almost a hundred years old. It began as a composer’s experiment, spent decades as a polite accompanist for home organs, got banned from dance halls, sneaked onto a number one record, and then, in a few short years around 1980, became the heartbeat of hip-hop, house, techno and pop. Along the way it changed how music is written, who gets to make it, and what a drum is even supposed to sound like.

This is the long version of that story. It covers more than fifty machines, from a 1930s rhythm keyboard to the drum machines on sale today: who built them, how they made their sounds, and the records that made them famous.

The timeline at a glance

YearMachineWhy it matters
1930 to 1932Rhythmicon (Theremin and Cowell)The first electronic rhythm machine, built to play rhythms no human could
1957Chamberlin RhythmateDrum beats on tape loops, for family singalongs
1959Wurlitzer SidemanThe first drum machine sold to the public
1963Korg Donca-Matic DA-20The first product of the company that became Korg
1963Raymond Scott’s Bandito the Bongo ArtistA composer’s homemade rhythm machine
1964Seeburg Select-A-RhythmFully transistorized, with patterns stored in a diode matrix
1967Ace Tone Rhythm Ace FR-1Small, cheap and everywhere, from the founder of Roland
Late 1960sKorg Mini Pops 7The rhythm box on Jean-Michel Jarre’s Oxygène
1971Maestro Rhythm King MRK-2Sly Stone’s “funk box”, on the first number one hit with a drum machine
1972Roland TR-77One of the first products of the new Roland company
1972Eko ComputeRhythmPunch cards and a 16-step grid: one of the first programmable machines
1975PAiA Programmable Drum SetAn early programmable machine, sold as a kit
1978Roland CR-78 CompuRhythmThe first with a microprocessor; write and save your own patterns
1979Boss DR-55 Dr. RhythmA tiny, battery-powered machine you program step by step
1980Linn LM-1The first drum machine to play samples of real drums
1980Roland TR-808Analog, cheap-sounding, a flop, then the most famous drum machine ever
1980Oberheim DMXSampled drums that helped build early hip-hop
1981Roland TR-606 and TB-303A small drum machine and its bass partner; later the sound of acid
1981Simmons SDS-VElectronic drums with hexagonal pads, played with sticks
1982LinnDrumSampled drums become the sound of 80s pop
1983Roland TR-909MIDI, analog drums plus sampled cymbals; the sound of house and techno
1983E-mu DrumulatorSampled drums for under $1,000
1983MIDIOne language for every electronic instrument
1984Linn 9000The first drum machine with a built-in MIDI sequencer
1984Sequential DrumtraksOne of the first MIDI drum machines
1984Yamaha RX11The start of Yamaha’s long RX series
1985Roland TR-707 and TR-727Roland’s first all-sample drum machines
1985 and 1987E-mu SP-12 and SP-1200The samplers behind golden-age hip-hop
1986Casio RZ-1Sampling for about $600; 3 Feet High and Rising
1986Korg DDD-1Big pads, crisp samples, optional sampling
1987Alesis HR-1616-bit sampled drums at a home-studio price
1988Akai MPC60Sampling, sequencing and 16 pads in one box
1989Roland R-8 Human Rhythm Composer“Feel” settings to make machines sound human
1990Alesis SR-16One of the best-selling drum machines ever
1994 and 1997Akai MPC3000 and MPC2000J Dilla, DJ Premier and the MPC sound
1996Roland MC-303 GrooveboxDrums, bass and synths in one box, for DJs and bedroom producers
1997ReBirth and FruityLoopsThe 808, 909 and step grid move into the computer
1999Korg Electribe ER-1Cheap, knob-covered and playable live
2001Elektron MachinedrumParameter locks: every step can sound different
2005Roland SP-404The sampler of the beat scene and lo-fi hip-hop
2009Native Instruments MaschineMPC-style pads that drive software
2013Korg Volca BeatsAnalog drums for the price of a night out
2014Elektron Analog Rytm, Roland TR-8Analog and sample hybrids; the classics return
2015Teenage Engineering Pocket OperatorsA drum machine the size of a calculator
2017Elektron Digitakt, Akai MPC Live, Arturia DrumBruteSampling grooveboxes, standalone MPCs and cheap analog
2018Roland TR-8SModeled 808 and 909 with samples on every track
2019Behringer RD-8An analog 808 copy for about $350
2025Roland TR-1000Roland’s first new analog drum machine in over 40 years

Before the drum machine: the dream of a mechanical drummer

People have tried to make machines keep time for centuries, from clockwork music boxes to player pianos. But the drum machine as we know it, a box that makes percussion sounds on its own and plays them in a pattern, needed electricity. The first one came from an unlikely partnership.

The Rhythmicon: a machine for impossible rhythms (1930 to 1932)

Around 1930 the American composer Henry Cowell was obsessed with rhythm. He wanted to hear rhythms that stacked different speeds on top of each other, like three beats against five against seven, played with a precision no human could manage. He asked the Russian inventor Léon Theremin, already famous for the eerie instrument that bears his name, to build him a machine for it.

The composer Joseph Schillinger with Léon Theremin's Rhythmicon, an early electronic rhythm machine
Photo: public domain, via Wikimedia Commons

The result was the Rhythmicon. Each key on its keyboard played a repeating pulse at a different rate, and the rates were related like the notes of a harmonic series: the second key twice as fast as the first, the third three times as fast, and so on. Hold down several keys and the pulses interlock into complex polyrhythms.

It drew real excitement when it was shown in 1932, but it never caught on. You could not play it loud or soft, accent a beat, or hold a note, and Cowell set it aside after a celebrated performance in New York. Still, the idea that a machine could play rhythm, and play rhythms beyond a human’s reach, was out in the world.

Try it in the Ultimate Drum Machine: give tracks different lengths on the TRACK tab, such as 3, 4, 5 and 7 steps, and they drift against each other, the Rhythmicon’s idea in a modern form.

Tape loops and spinning discs (1950s)

The next drum machines were built for a much gentler purpose: keeping time at home.

In 1957, the Iowa-born engineer Harry Chamberlin built the Chamberlin Rhythmate, which played 14 tape loops of real drummers and percussionists, with a sliding playback head to pick between them. It was meant for family singalongs, and only around 100 were sold, but it was something remarkable: a sampler before the word existed. Chamberlin would go on to build the tape-based Chamberlin keyboard, the ancestor of the Mellotron.

Then came the first drum machine most people could actually buy. In 1959 Wurlitzer, the organ and jukebox company, released the Sideman. Inside its wooden cabinet a motor turned a disc, a bit like a music box, and contacts on the disc triggered sounds made by vacuum tubes. A slider set the tempo from 34 to 150 beats per minute, and you chose from a dozen preset rhythms such as the waltz, the tango, the bolero and the march.

The top of a 1959 Wurlitzer Sideman drum machine, with its rhythm and tempo controls
Photo: andrew garton (derivative by Clusternote), CC BY-SA 2.0, via Wikimedia Commons

The Sideman worked well enough to scare musicians. The musicians’ union ruled that it could only be used in cocktail lounges, and only if the keyboard player was paid the wages of three musicians. Wurlitzer stopped making it in 1969, but by then the idea had spread.

Meanwhile the composer and inventor Raymond Scott was building rhythm machines of his own: a Rhythm Synthesizer around 1960 and, in 1963, a drum machine with the wonderful name Bandito the Bongo Artist. He used them on his Soothing Sounds for Baby records.

Transistors and the diode matrix (1960s)

Tubes and spinning discs were big and fragile. Transistors changed that.

In 1964 the American company Seeburg patented a way to store rhythm patterns electronically in a diode matrix, a grid of tiny one-way electronic switches. Think of it as a sheet of graph paper where each column is a moment in the bar and each row is a drum sound; a diode placed in a square means “play this sound here”. A small counter steps across the columns and the matrix fires the right sounds at the right time. Seeburg’s Select-A-Rhythm was one of the first fully transistorized rhythm machines, and that grid of steps is the direct ancestor of every step sequencer today, including the one in the Ultimate Drum Machine.

A Seeburg Select-A-Rhythm, an early transistorized rhythm machine from the 1960s
Photo: stereogab (derivative by Clusternote), CC BY-SA 2.0, via Wikimedia Commons

In Japan, two companies that would shape the future got started. In the early 1960s a Tokyo nightclub owner, Tsutomu Katoh, met the accordion player Tadashi Osanai, who was unhappy with the Sideman he used on stage. Katoh funded Osanai to build something better, and in 1963 their company, Keio-Giken, released the Donca-Matic DA-20. The company is better known today as Korg.

A 1963 Korg Donca-Matic DA-20 rhythm machine, a tall wooden cabinet with a speaker
Photo: Brandon Daniel, CC BY-SA 2.0, via Wikimedia Commons

Keio followed with a whole family of smaller, cheaper rhythm boxes called the Mini Pops, made from the late 1960s through the 1970s. They were designed to sit on top of a home organ and play the waltz, samba and rumba, but one of them, the Mini Pops 7, found a very different life. The French composer Jean-Michel Jarre used it throughout his 1976 album Oxygène, and for the famous rhythm of “Oxygène Part IV” he overlaid two of its presets in a way the designers never intended. Decades later Aphex Twin used a Mini Pops on his album Syro and named a single, “minipops 67 [120.2]”, after it.

A Korg (Keio) Mini Pops 7 rhythm machine, the drum box on Jean-Michel Jarre's Oxygène
Photo: Alison Cassidy, CC BY-SA 4.0, via Wikimedia Commons

The other was Ace Tone, founded in 1960 by an engineer named Ikutaro Kakehashi. His Rhythm Ace FR-1 of 1967 was small, reliable and affordable. It had 16 preset patterns that could be combined, and four buttons to play sounds by hand. It was sold around the world, including as the Multivox in the United States and the Bentley Rhythm Ace in Britain (where it later lent its name to a band).

An Ace Tone Rhythm Ace FR-3, sold as the Multivox, with rows of rhythm buttons
Photo: Alison Cassidy, CC BY-SA 4.0, via Wikimedia Commons

Roland is born (1972)

In 1972 Kakehashi left Ace Tone and founded a new company in Osaka. He called it Roland. Among its very first products was a rhythm machine, the TR-77, in a handsome wooden cabinet full of preset rhythms. Organ makers liked it enough that Hammond sold a version of it under its own name. “TR” stood for transistor rhythm, a prefix that would become the most famous in drum machine history.

A Roland TR-77 rhythm machine in a wooden cabinet, one of Roland's first products
Photo: Trouby at English Wikipedia, CC BY-SA 3.0, via Wikimedia Commons

Out of the living room and into the charts (late 1960s and 1970s)

For a decade these machines were designed to be heard as little as possible: a quiet beat behind an organ. Then musicians began to love them for exactly what they were.

One of the first pop hits built on a rhythm box was Robin Gibb’s “Saved by the Bell”, which reached number two in Britain in 1969. In 1971 Sly Stone, frustrated with his band and fascinated by the sound, filled the album There’s a Riot Goin’ On with a Maestro Rhythm King MRK-2, which he called his “funk box”. Its single “Family Affair” became the first number one hit with a drum machine on it. The box itself was simple, with presets like the fox trot and samba, but in Sly’s hands its stiff, ghostly groove sounded like the future.

A Maestro Rhythm King, the family of rhythm boxes Sly Stone called his funk box
Photo: jm3 on Flickr, CC BY-SA 2.0, via Wikimedia Commons

Others followed. In 1972 Timmy Thomas built “Why Can’t We Live Together” around little more than an organ and a rhythm box. In Germany the band Can used drum machines on tracks like “Peking O”, and the electronic musicians of Berlin and Düsseldorf began to treat the rhythm box as an instrument in its own right. Musicians were discovering that a machine’s stiffness was not a flaw to hide. It was a sound.

You can program it yourself (1972 to 1979)

Almost every machine so far shared one limit: you could only choose from the patterns built into it. That started to change in the 1970s.

The first sign came from Italy. In 1972 the organ maker Eko released the ComputeRhythm, a space-age console with a grid of lit buttons, 16 steps for each of its sounds, separate volume faders and outputs, and a reader for punch cards that stored your patterns. It was expensive and very few were made (collectors believe only a couple of dozen exist), but it found its way to exactly the right people. Jean-Michel Jarre used one on Oxygène and Équinoxe, and Manuel Göttsching used it on his influential one-take album E2-E4.

In 1975 the small American company PAiA sold a Programmable Drum Set by mail order as a kit, one of the first machines that let you program your own beats; Peter Gabriel was an early fan. Ace Tone’s Rhythm Producer FR-15 let you modify its presets.

The PAiA Programmable Drum Set from 1975, an early programmable drum machine sold as a kit
Photo: Clusternote, CC BY-SA 3.0, via Wikimedia Commons

The big leap came in 1978 with Roland’s CR-78 CompuRhythm. It was the first drum machine with a microprocessor, and the first mainstream machine where you could write your own patterns, store them in memory and play them back, with controls for accents and muting. It looked like another organ-top rhythm box, but it was really a small computer. You can hear its gentle, ticking sound on Blondie’s “Heart of Glass” and Phil Collins’s “In the Air Tonight”, among many others.

A year later Roland’s sister brand Boss put programming in everyone’s hands with the DR-55 Dr. Rhythm. It was tiny, ran on batteries, cost about $200, and had just four sounds (kick, snare, rimshot and hi-hat), but you could write your own patterns step by step and store them. Guitarists and home recordists loved it. It was the first drum machine Depeche Mode used on stage, and it turns up on early records by The Cure and Joy Division. Its step-by-step programming, one beat at a time, is the way most people still program drum machines today.

1980: the year everything changed

Three machines arrived in 1980, and between them they set the course for the next forty years.

The Linn LM-1: real drums in a box

Roger Linn was a guitarist in Los Angeles who was frustrated with the drum machines of the day, which mostly played preset samba patterns and sounded nothing like a drummer. By the late 1970s, memory chips had become small and cheap enough to hold short digital recordings, so Linn built a machine around them. The LM-1 Drum Computer, announced in 1979 and released in 1980, was the first drum machine to play samples: twelve 8-bit recordings of real drums, each one tunable.

The Linn LM-1 Drum Computer, the first drum machine to play samples of real drums
Photo: Linn Electronics, courtesy of Forat Electronics, CC BY-SA 3.0, via Wikimedia Commons

It cost about $5,500, and only somewhere between 500 and 725 were built, so it was a machine for stars and big studios. But the stars loved it. Prince used several, and the LM-1 is all over the pop records of the early 1980s. Linn also gave it something that would matter as much as the sound: a swing setting that nudged every second note slightly late, so programmed beats felt human. He later refined the idea in the LinnDrum and the MPC, and nearly every drum machine since has borrowed it.

The Oberheim DMX

Also in 1980, synthesizer maker Tom Oberheim’s company introduced the DMX, another sample-based machine, at about $2,895. Its punchy sounds became a cornerstone of early hip-hop and electro, and both the producer Davy DMX and the rapper DMX took their names from it. A cheaper sibling, the Oberheim DX, followed in 1983.

An Oberheim DMX drum machine
Photo: Alison Cassidy, CC BY-SA 4.0, via Wikimedia Commons

The Roland TR-808: the flop that took over the world

Roland went the other way. Memory was still expensive, so instead of samples, the TR-808 Rhythm Composer made every sound with analog circuits. The team was led by chief engineer Tadao Kikumoto; Hiro Nakamura designed the sound circuits and Hisanori Matsuoka the software.

It had a bass drum, snare, toms, congas, rimshot, claves, handclap, maracas, cowbell, cymbal and open and closed hi-hats, and you could program up to 32 patterns on its row of colored step buttons. It cost $1,195.

The Roland TR-808 Rhythm Composer with its row of colored step buttons
Photo: Brandon Daniel (derivative by Clusternote), CC BY-SA 2.0, via Wikimedia Commons

Next to the LM-1 it sounded nothing like real drums. Its kick was a deep, humming tone; its clap and cowbell were unmistakably electronic. Critics found it cheap and thin, and sales were poor. When the particular transistors used in its noise circuit ran out, Roland stopped making it, in 1983, after building about 12,000.

Then something unexpected happened. Used 808s became cheap, and they ended up in the hands of young musicians who did not care whether it sounded like a drummer. They cared that it sounded like nothing else. In 1981 the Japanese group Yellow Magic Orchestra put it on their album BGM. In 1982 Marvin Gaye built “Sexual Healing” around it, the first US hit to feature the 808, and Afrika Bambaataa and the Soulsonic Force released “Planet Rock”, whose fast, futuristic 808 beat launched electro and changed hip-hop. From there the 808 spread to Miami bass, Southern rap, and eventually trap, where its long, booming kick is played like a bass line. It has been used on more hit records than any other drum machine.

The little silver boxes: TR-606, TB-303 and CR-8000 (1981)

Roland followed the 808 with two small, silver, battery-powered boxes meant for guitarists and solo performers. The TR-606 Drumatix was a compact analog drum machine with seven sounds and the same style of step programming as the 808. Its partner, the TB-303 Bass Line, was a little bass synthesizer with its own sequencer, designed to play bass lines alongside it. The pair were meant to replace a rhythm section for practice. Like the 808, both sold poorly and were soon discontinued.

The Roland TR-606 Drumatix, a small silver analog drum machine
Photo: Midas Wouters, CC BY-SA 3.0, via Wikimedia Commons

The 606 found a second life as a crisp, ticking hi-hat and snare machine in electro, techno and industrial music. The 303’s second life was far bigger, and we will come back to it in Chicago.

The panel of a Roland TB-303 Bass Line, the sound of acid house
Photo: Steve Sims, CC0, via Wikimedia Commons

The same year Roland released the CR-8000 CompuRhythm, an analog machine that sat between the CR-78 and the 808, with its own bright claps and hats. It is still prized for its sound.

A Roland CR-8000 CompuRhythm analog drum machine
Photo: Blair Rideout, CC BY 2.0, via Wikimedia Commons

Drummers go electronic: the Simmons SDS-V (1981)

Not every electronic drum was a box of buttons. In Britain, Dave Simmons and the producer and drummer Richard James Burgess developed the Simmons SDS-V, released in 1981: the first fully electronic drum kit that a drummer could actually play with sticks. Its pads were famous hexagons, and its analog circuits made the whooshing toms and cracking snares that defined the sound of early 80s pop. Burgess produced the first hit to feature it, Spandau Ballet’s “Chant No. 1”, in 1981, and it went on to appear with Duran Duran, Queen, Genesis and countless others.

A Simmons SDS-V electronic drum kit with its hexagonal pads
Photo: Ben Franske, CC BY-SA 2.5, via Wikimedia Commons

The Simmons kits mattered to the drum machine story in two ways. They proved that electronic drums could be expressive, and they set the stage for pads and drum machines working together, a link MIDI would soon make easy.

How does a drum machine make a sound?

There are two basic ways, and the 1980 machines show both.

Analog synthesis builds a drum out of electronic ingredients. The 808’s kick works like a drum head: a short electrical pulse sets off a circuit that rings and dies away, a deep tone that drops slightly in pitch. A snare is a tone for the drum’s body plus a burst of filtered noise for the rattle of the snares. Hi-hats and cymbals use several square waves at clashing pitches, run through a filter, which creates a metallic shimmer. Because each sound is made fresh, you can reshape it with knobs: a longer decay, a higher tune, a snappier attack.

Sampling plays back a short recording of a real instrument, stored as digital audio. Early samples were short and low-resolution (the LM-1 used 8-bit samples), which gave them their own gritty character. Samples sound “real”, but they are harder to reshape beyond tuning and volume.

Later machines added a third way, FM synthesis, which creates bell-like and metallic tones by letting one oscillator rapidly bend the pitch of another, and many mixed all of them. The Ultimate Drum Machine does several on every track: each of its twelve tracks is a small synthesizer with machines in the spirit of these classics, including 808-style kicks and snares, hats made of square waves and noise, and an FM tone, and every track can also play a sample on top.

Sampled drums go mainstream (1982 to 1987)

The LM-1 proved that people wanted real drum sounds. The next few years were about making them affordable, and almost every music company joined in.

Linn followed up in 1982 with the LinnDrum, at around $3,000, which became the sound of countless 80s pop hits, from a-ha’s “Take On Me” to records by Prince. It added crash and ride cymbal samples and a cleaner, punchier sound.

The front panel of a LinnDrum digital drum machine
Photo: Linn Electronics, courtesy of Forat Electronics, CC BY-SA 3.0, via Wikimedia Commons

In 1983 E-mu Systems released the Drumulator for just $999, a third of the price of a LinnDrum, using drum sounds recorded by Bill Gibson of Huey Lewis and the News. E-mu sold over 12,000 of them in two years.

The front panel of an E-mu Drumulator digital drum machine
Photo: Andreas Gortan, CC BY-SA 4.0, via Wikimedia Commons

In 1984 Linn tried to build everything into one box. The Linn 9000 combined sampled drums, 18 touch-sensitive pads, and the first MIDI sequencer built into a drum machine, with optional sampling and a floppy drive. It was years ahead of its time and cost $5,000, but it was also notoriously unreliable, and its problems helped sink Linn Electronics, which closed in 1986. The ideas lived on: its pads and workflow pointed straight to the MPC.

The Linn 9000, a drum machine with touch-sensitive pads and a built-in MIDI sequencer
Photo: Linn Electronics, courtesy of Forat Electronics, CC BY-SA 3.0, via Wikimedia Commons

The same year Sequential, the company of MIDI co-inventor Dave Smith, released the Drumtraks, with 13 sampled sounds, each tunable, and one of the first MIDI connections on a drum machine after the TR-909. Yamaha began its long-running RX series with the RX11 and RX15, and followed in 1986 with the RX5, a heavyweight with sounds you could load from cartridges.

The Sequential Drumtraks, one of the first drum machines with MIDI
Photo: Gerald Moore, CC BY 2.0, via Wikimedia Commons
A Yamaha RX11 digital drum machine
Photo: Etomonick, Public domain, via Wikimedia Commons

Roland went fully digital with the TR-707 in 1985, its first drum machine to use only samples, with a bright, light sound, a little screen and the TR-style row of step buttons. Later that year came the TR-727, the same machine with Latin percussion, its bongos, congas and timbales a staple of house records. The cheaper TR-505 (1986) and TR-626 (1987) followed.

The Roland TR-707 Rhythm Composer, Roland's first all-sample drum machine
Photo: Speculos, CC BY-SA 3.0, via Wikimedia Commons

In 1986 two companies brought sampling within everyone’s reach. Casio, better known for calculators and home keyboards, released the RZ-1 for about $600: a drum machine with its own sounds plus the ability to sample four sounds of your own. Producer Prince Paul made much of De La Soul’s 1989 album 3 Feet High and Rising with one. Korg released the DDD-1, with large velocity-sensitive pads, crisp sounds on swappable cards and an optional sampling board.

A Casio RZ-1 sampling drum machine
Photo: Brandon Daniel (derivative work), CC BY-SA 2.0, via Wikimedia Commons
A Korg DDD-1 drum machine with large pads
Photo: bjortklingd (derivative work), CC BY-SA 3.0, via Wikimedia Commons

In 1987 Alesis released the HR-16, with 49 sampled sounds in 16-bit quality and 100 programmable patterns, at a price home studios could afford.

MIDI and the TR-909 (1983)

One of the most important inventions in the drum machine’s story is not a drum machine at all. In 1983, after years of incompatible connectors, Ikutaro Kakehashi of Roland and Dave Smith of Sequential Circuits unveiled MIDI, a common language that lets electronic instruments from any maker play together. A drum machine could now drive a synthesizer, a sequencer or a computer, and be driven by them. Kakehashi and Smith received a Technical Grammy Award for it in 2013, and MIDI is still the standard today. The Ultimate Drum Machine speaks it too.

The same year Roland released the TR-909, designed by Tadao Kikumoto, who also created the TB-303. It mixed analog drums with sampled cymbals and hi-hats, and it was the first drum machine with MIDI. Its kick was built differently from the 808’s, with separate circuits for the punchy attack and the body, so it hit harder. Like the 808, it was a commercial flop.

The Roland TR-909 Rhythm Composer, the sound of house and techno
Photo: Brandon Daniel (derivative by Clusternote), CC BY-SA 2.0, via Wikimedia Commons

And like the 808, it was reborn secondhand. In Chicago and Detroit in the mid-1980s, DJs and producers with little money bought used 909s and 303s and invented new music with them. The 909’s thumping kick, crisp claps and sizzling hi-hats became the sound of house and techno. When the Chicago group Phuture twisted the knobs of a TB-303 on “Acid Tracks” in 1987, its squelching, rubbery bass became the sound of acid house. Four on the floor, the steady kick on every beat that still powers dance floors, is in large part the sound of a 909.

Samplers and the golden age of hip-hop (1985 to 1990s)

Hip-hop began with DJs looping drum breaks from records on two turntables. Sampling drum machines let producers do it in a box.

E-mu’s SP-12 of 1985 and its successor, the SP-1200 of 1987, let producers record short bits of any record and play them from pads, alongside a sequencer with its own swing. The SP-1200 had 12-bit sound and just 10 seconds of memory. To squeeze in longer samples, producers recorded records sped up from 33 to 45 RPM and slowed them back down in the machine, which gave the drums a dark, crunchy, unmistakable sound. Pete Rock, Marley Marl, the Beastie Boys and many more made it the sound of late 80s and early 90s East Coast hip-hop.

An E-mu SP-1200 sampling drum machine, the sound of golden-age hip-hop
Photo: 2xUeL, Public domain, via Wikimedia Commons

In 1988 Roger Linn teamed up with the Japanese company Akai to make the MPC60. It put sampling, sequencing and drum machine in a single box, with a 4 by 4 grid of pressure-sensitive pads and Linn’s famous swing. It became one of the most important instruments in hip-hop and beyond.

An Akai MPC60 with its grid of 16 pads, designed by Roger Linn
Photo: Kimi95 at Italian Wikipedia, CC BY 3.0, via Wikimedia Commons

Its descendants shaped the sound of the next two decades. The MPC3000 (1994), the last MPC Linn designed, was the machine of DJ Premier and J Dilla, whose loose, behind-the-beat drum programming changed how producers think about timing. Dilla’s MPC3000 is now in the Smithsonian’s National Museum of African American History and Culture. The cheaper MPC2000 (1997) put the workflow in the hands of a new generation, Kanye West among them. Linn himself received a Technical Grammy in 2011.

An Akai MPC3000 Limited Edition in the collection of the Smithsonian
Photo: The Smithsonian Institution, CC0, via Wikimedia Commons
An Akai MPC2000 sampling drum machine
Photo: Alkivar, Public domain, via Wikimedia Commons

Chasing the human feel (1989 to early 1990s)

By the end of the 1980s, sampled drums sounded real. The new problem was feel: a real drummer never plays two hits exactly the same. In 1989 Roland’s answer was the R-8 Human Rhythm Composer. Its “feel patches” added small, controlled variations in timing, loudness and pitch, and its pads responded to how hard you hit them. The name told the story. The TR-808 had proudly said “Computer Controlled” on its panel; the R-8 promised to be human.

The Roland R-8 Human Rhythm Composer
Photo: Candyman777, CC BY-SA 3.0, via Wikimedia Commons

The R-8 became a studio workhorse for dance acts like Orbital and Underworld. Alesis followed in 1990 with the SR-16, a simple, inexpensive machine with good stereo sounds that has stayed in production for decades and became one of the most widely used drum machines ever made.

The groovebox era (1990s)

Through the early 1990s, used 808s, 909s and 303s became so popular in dance music that their prices soared. Rather than remake them, Roland built something new. In 1996 it released the MC-303 Groovebox, which put drums, bass and synth sounds, a sequencer and real-time controls into a single inexpensive box aimed at DJs and bedroom producers. The name stuck: “groovebox” is now a word for any all-in-one beat machine.

A Roland MC-303 Groovebox
Photo: Leuo, CC BY-SA 3.0, via Wikimedia Commons

Others followed. In 1999 Korg launched the Electribe series with the ER-1 drum machine, an inexpensive box covered in knobs, with modeled analog sounds, a 64-step sequencer and controls meant to be played live. Electribes became a favorite of a generation of producers who learned to make music by turning knobs while a pattern played.

A Korg Electribe ER-1 rhythm synthesizer covered in knobs
Photo: hajime yoneya, CC BY-SA 2.0, via Wikimedia Commons

The drum machine moves into the computer (late 1990s to 2000s)

By the late 1990s personal computers were fast enough to do everything a drum machine did, in real time. Propellerhead’s ReBirth RB-338 (1997) recreated the 808, 909 and 303 in software. FruityLoops, which began as a simple step sequencer in 1997 and grew into FL Studio, put a grid of steps in front of a generation of bedroom producers. Music software from Ableton Live to GarageBand made drum sequencing a basic feature.

The result was a huge democratization. A drum machine that once cost as much as a car, or was simply impossible to find, became something anyone with a laptop could use, and samples of almost every classic machine became freely available.

Pads, samplers and the beat scene (2000s)

Hardware did not disappear. Some of it got smaller and stranger. Roland’s small SP samplers, from the Boss SP-303 to the SP-404 of 2005, packed sampling, pads and heavy, characterful effects into a box you could hold in one hand. Madlib and J Dilla worked with the SP-303, and the SP-404 became the instrument of the Los Angeles beat scene and later of lo-fi hip-hop, where its crunchy filters and vinyl effects are part of the sound. Roland now celebrates “404 Day” every April 4.

A Roland SP-404SX sampler, a staple of the beat scene
Photo: Elperfectoinsecto, CC BY-SA 4.0, via Wikimedia Commons

In 2009 Native Instruments released Maschine, a 4 by 4 pad controller with knobs and screens that drives powerful drum and sampling software on a computer. It combined the hands-on feel of an MPC with the power of software, and controllers like it, from Ableton’s Push to Akai’s own, have been central to beat making ever since.

Close-up of the glowing pads on a Native Instruments Maschine controller
Photo: Dmitriy G., CC BY-SA 2.0, via Wikimedia Commons

Elektron and the parameter lock (2001 to today)

One of the most influential new ideas in hardware came from Sweden.

In 2001 a young company called Elektron released the Machinedrum. Alongside its digital drum synthesis, it introduced a new way to sequence: the parameter lock. On a classic drum machine, every hit on a track sounds the same unless you reach over and turn a knob while it plays. With parameter locks, you hold down a step and turn any knob, and that setting belongs to that step alone. A low tom can become a high tom on one step, a hi-hat can get shorter on the offbeats, a single snare hit can get a burst of delay. One track starts to sound like a whole performance.

An Elektron Machinedrum SPS-1, which introduced parameter locks
Photo: mikael altemark, CC BY 2.0, via Wikimedia Commons

Elektron built on it for two decades. The Analog Rytm of 2014 combined eight analog drum voices with samples, and added individual track lengths, micro timing, accents, retrigs, sound changes per step, and trig conditions: steps that play only some of the time, only on certain passes through the pattern, or only when another step did or did not play. The Rytm MKII followed in 2017.

An Elektron Analog Rytm MKII analog drum machine and sampler
Photo: Systemtechniker, CC0, via Wikimedia Commons

That same year the sample-based Digitakt made the Elektron way of working far more affordable and became one of the most popular drum machines of its time. The Syntakt followed in 2021, and the Digitakt II in 2024.

An Elektron Digitakt II sampling drum machine
Photo: Systemtechniker, CC BY-SA 4.0, via Wikimedia Commons

The classics return, and drum machines for everyone (2010s to today)

The last fifteen years have been a golden age for drum machines. There are more of them, at more prices, than ever before.

Small and cheap machines brought analog drums to beginners. Korg’s Volca Beats (2013) put analog drum sounds and a step sequencer in a battery-powered box about the size of a paperback, at a very low price. The Swedish company Teenage Engineering went smaller still with its Pocket Operators (2015), drum machines and synths the size of a calculator, sold as bare circuit boards. Arturia brought a full-size analog machine with lots of knobs to a modest price with the DrumBrute (2017).

A Korg Volca Beats, a small analog drum machine
Photo: Ashley Pomeroy, CC BY-SA 4.0, via Wikimedia Commons
A Teenage Engineering Pocket Operator drum machine, about the size of a calculator
Photo: Tim Walker, CC BY 2.0, via Wikimedia Commons
An Arturia DrumBrute analog drum machine
Photo: Kazuhisa OTSUBO, CC BY 2.0, via Wikimedia Commons

At the same time the classics came back. Roland revived the 808 and 909 sounds with circuit modeling in the TR-8 (2014) and TR-8S (2018), with a fader and knobs for every drum, and the TR-8S added samples on every track. Small Boutique remakes like the TR-08 and TR-09 followed. Behringer released analog copies of the classics, starting with the 808-style RD-8 in 2019 for about $350, a fraction of what an original sells for today.

A Roland TR-8 Rhythm Performer with its colored step buttons
Photo: David J, CC BY 2.0, via Wikimedia Commons
A Roland TR-8S Rhythm Performer
Photo: Kazuhisa OTSUBO, CC BY 2.0, via Wikimedia Commons
A Behringer RD-8, an analog copy of the TR-808
Photo: Ashley Pomeroy, CC BY-SA 4.0, via Wikimedia Commons

The MPC itself became a standalone instrument again with the MPC Live (2017), with a touch screen and a battery, no computer needed.

An Akai MPC Live, a standalone MPC with a touch screen
Photo: Joan Recordà, CC BY-SA 4.0, via Wikimedia Commons

And in October 2025 the story came full circle. Roland released the TR-1000 Rhythm Creator, its first new drum machine with true analog voices in over 40 years. It recreates 16 circuits from the TR-808 and TR-909 and adds digital sounds, stereo sampling and modern sound shaping on every track, for about $2,700. Forty-five years after the 808 was written off as a flop, its circuits are the heart of Roland’s flagship.

What a hundred years of drum machines teach us

A few lessons repeat through the whole story:

  • Character beats realism. The machines that changed music, the 808, the 909, the SP-1200, the Mini Pops, were rarely the most realistic. They had a sound you could not get anywhere else.
  • Limits create styles. Ten seconds of sampling time led to the pitched-down crunch of golden-age hip-hop. A few preset patterns led to Sly Stone’s funk box. Two Mini Pops presets played at once became “Oxygène”.
  • Groove matters as much as sound. Swing, accents and micro timing, from Roger Linn’s swing to the R-8’s feel patches to Elektron’s micro timing and J Dilla’s loose timing, are what make a programmed beat feel alive.
  • Cheap and available wins. Many classics only found their audience once they were cheap enough for young musicians to buy, from used 808s to the Volca Beats and FruityLoops.
  • Every machine is used in a way its makers did not expect. The 808 was meant to demo songs; the 303 was meant to replace a bass player; the Mini Pops was meant to play a waltz.

Where the Ultimate Drum Machine fits

The Ultimate Drum Machine is a love letter to all of this history, and it is free in your browser. Here is how each idea above lives on in it:

IdeaWhere it comes fromIn the Ultimate Drum Machine
A grid of stepsDiode matrix machines, the Eko, the 808A 64-step sequencer on twelve tracks
PolyrhythmsThe RhythmiconDifferent lengths and speeds per track
Analog-style drum soundsThe 808, 606 and 909Synth machines for kicks, snares, hats, claps, toms, cowbell and more
FM tonesLate 80s digital machinesAn FM machine for bells, metal and bass
SamplesThe LM-1, SP-1200, MPC and SP-404Load or record a sample on any track
Swing and feelRoger Linn, the R-8Swing, plus per-step micro timing
MIDIKakehashi and SmithPlay it from a keyboard or controller, or sync to other gear
Parameter locks and trig conditionsElektronLocks on every step, chance and conditions, LFOs on everything

You can try every idea in this article in a few clicks. Open the Ultimate Drum Machine and make a beat, then read the manual to go deeper.

Listen: drum machines on record

  • Sly and the Family Stone, “Family Affair” (1971): Maestro Rhythm King MRK-2
  • Timmy Thomas, “Why Can’t We Live Together” (1972): an organ rhythm box
  • Jean-Michel Jarre, Oxygène (1976): Korg Mini Pops 7 and Eko ComputeRhythm
  • Blondie, “Heart of Glass” (1978): Roland CR-78
  • Phil Collins, “In the Air Tonight” (1981): Roland CR-78
  • Yellow Magic Orchestra, BGM (1981): Roland TR-808
  • Spandau Ballet, “Chant No. 1” (1981): Simmons SDS-V
  • Marvin Gaye, “Sexual Healing” (1982): Roland TR-808
  • Afrika Bambaataa and the Soulsonic Force, “Planet Rock” (1982): Roland TR-808
  • Prince, 1999 (1982): Linn LM-1
  • a-ha, “Take On Me” (1985): LinnDrum
  • Phuture, “Acid Tracks” (1987): Roland TB-303
  • Chicago house and Detroit techno of the mid to late 1980s: Roland TR-909, TR-707 and TB-303
  • De La Soul, 3 Feet High and Rising (1989): Casio RZ-1
  • East Coast hip-hop of the late 1980s and early 1990s: E-mu SP-1200 and Akai MPC60
  • J Dilla’s productions of the late 1990s and 2000s: Akai MPC3000
  • The Los Angeles beat scene and lo-fi hip-hop of the 2000s and 2010s: Roland SP-303 and SP-404

Sources