Manual

Open the Ultimate Drum Machine in another tab and follow along. What changed lately: see the version history.

A free drum machine that runs in your web browser. It has twelve tracks. Each track is a small synthesizer that makes one drum sound (or a bass or lead), and can also play a sample. You build beats on a grid of steps, in the style of Elektron hardware drum machines: place hits on the steps, then give any single step its own sound by locking knob settings to it.

The machine is new and still growing, so treat the presets and default sounds as starting points.

Contents

Words used in this manual

Word Means
Track One row of the grid, playing one sound. There are twelve.
Step One square in a track’s row: a slot in time. Sixteen steps make one bar of four beats.
Hit (or trig) A step that is switched on, so the track plays on it
Pattern One loop: all twelve tracks and their steps. There are eight per project.
Song A list of patterns played in order
Machine The kind of sound a track makes: kick, snare, hat, synth and so on
Lock (parameter lock) A knob setting that belongs to one step only. That step sounds different; the rest of the track does not change.
Trigless lock A step that plays no new hit, but changes the sound that is still ringing from an earlier hit
Envelope How a sound changes over the time of one hit: how fast it starts, how long it lasts
Filter Takes away low or high frequencies to make a sound darker, thinner or more nasal. CUTOFF sets where.
Resonance A ringing boost right at the filter’s CUTOFF. High settings whistle.
LFO A slow, repeating wobble that moves a knob for you, for movement and variation
Send How much of a track goes into the shared delay, reverb or modulation effect
Sidechain (duck) Turning everything else down for a moment each time one track (usually the kick) hits
Sample A recorded sound file, such as a WAV or MP3
Render Turning the beat into an audio file, faster than real time
Stems One audio file per track, for mixing in other music software

1. Quick start

  1. Press Play (or the Space bar). Pattern 1 is a demo.
  2. Click pads in the grid to add or remove hits. Drag across pads to paint several.
  3. Click a track name on the left (or press its key: 1 to 9, 0, – and = for tracks 1 to 12) to choose that track. The dark panel above the grid now shows that track’s knobs.
  4. Use the tabs in the panel to reach different groups of knobs. Drag a knob up or down.
  5. To change one step only: hold Shift and click a pad (or right-click it, or press and hold on a touch screen). The pad blinks. Turn any knob. That value now belongs to that step. Press Esc when done.

Your work saves itself in the browser as you go.

2. The screen

From top to bottom, in four numbered zones:

  • Display (top right): tempo, pattern number and name, the active track and its position.
  • 1 · Transport: Play, Tempo with Tap, Swing, Volume, Fill (with Cue and Latch), Rec (with Step and Quant), the Click track and Keys.
  • 2 · Pattern and song: the eight Pattern buttons with Save, Reload, Copy, Paste and Clear, the Song row (section 12), and Pads, which opens the twelve performance and scene pads (section 13). The pads stay open or closed the way you left them.
  • 3 · Tracks: the step sequencer, one row per track (section 6).
  • 4 · Sound (dark): the active track’s name, its Machine and Preset menus, sound copy and paste, Setup, six
    group buttons, the tabs of the open group, the display, and up to eight knobs. A line of help under the knobs changes with what you are doing.

The six groups are named like the parameter keys on an Elektron Digitakt II, and hold all of the tabs:

Group Tabs
TRIG TRIG, CHANCE, RETRIG, PARTS: how the hits play
SRC SRC, SAMPLE, SOUNDS: the sound source
FLTR FLTR, INSERT
AMP ENV, AMP
FX DELAY, REVERB, MOD FX, FX LFO, MASTER, COMP
MOD LFO 1, LFO 2, LFO 3, FOLLOW, MACRO

The track and pattern settings (TRACK, EUCLID and PATTERN tabs) are behind the Setup button next to the track’s name, the way Elektron keeps length and speed in a menu.

Each group remembers the tab you last had open in it. The MOD button gets a yellow line when an LFO on this track is moving something.

The display

The left side draws a picture of whatever tab is open:

Tab The display shows
SRC How the tone and the noise fade over time, and how the pitch falls (dashed yellow)
SAMPLE The sample’s waveform with the part that plays lit. Drag the yellow markers to move START and END.
FLTR The filter’s frequency curve. A dashed yellow curve shows where the envelope starts.
INSERT The bass and treble settings, and the ring modulator
AMP The volume envelope, bars for volume and the three sends, and a dot for pan
LFO 1 to 3, FX LFO One bar of the LFO’s wave at its real depth, with phase and fade applied
DELAY Where the echoes fall over two bars and how fast they fade. For the pong types, up is left and down is right.
REVERB The shape and length of the tail
Any other tab A map of the whole pattern: all twelve tracks, every step in use, locks marked in orange, moving playheads

Under the picture, a strip lists every knob on the open tab with its value, so you can read them all at a glance. Values locked on the selected steps show in yellow.

The right side is always live. Click or tap it to step through four views:

View Shows Under the hood
OUT WAVE The live sound wave of the whole mix Oscilloscope of the whole mix
TRACK WAVE The live sound wave of the active track alone Oscilloscope of the active track alone
OUT SPECTRUM How much bass, middle and treble the whole mix has: bass on the left, treble on the right Frequency content of the whole mix, bass on the left, treble on the right
TRACK SPECTRUM The same for the active track alone Frequency content of the active track alone

Under it are a level meter for each track (the active track in yellow) and GR, which shows how hard the master compressor is working. Your choice of view is remembered.

More of the screen:

  • Grid: a row of grouped tools (Steps: the page buttons for steps 1-16, 17-32, 33-48, 49-64. View: Piano roll and Mutes. History: Undo and Redo. This page / track: Copy page, Paste page, Clear track. Dice: Track, Notes, Locks), then one row per track. Each row has the track name, M (mute), S (solo) and 16 pads.
  • Below the machine: shortcuts, audio export, and the Projects panel (save, open, project files).

What pads look like:

Pad Meaning
Dark Empty step
Light A hit
Hollow light outline A trigless lock (changes sound, no new hit)
Orange dot, top right The step has parameter or effect locks
Dark bar near the bottom The step has a condition, chance below 100, a retrig or a nudge
Dark cap along the top Accented step
Yellow The playhead is on this step
Blinking with an outline Selected for editing
Faded Beyond the track’s length

Yellow always means “live” or “locked”. A knob drawn in yellow is locked on the selected step.

3. Knobs

  • Drag up or down to change. Hold Shift while dragging for fine control.
  • Mouse wheel over a knob changes it by one.
  • Double-click resets it. With a step selected, double-click removes that step’s lock on that knob.
  • Keyboard: click a knob, then arrow keys change it by one, Shift + arrows by ten, Delete resets.

Most knobs run 0 to 127. Some run from a negative to a positive value (TUNE, PAN, ENV). Some step through named choices (TYPE, WAVE, DEST).

4. Tracks and sounds

Each track plays one machine: a recipe for a kind of drum. Pick it with the Machine menu in the panel.

Machine What it is Under the hood
Kick The basic electronic kick: a deep tone that drops fast in pitch, with a click at the start Sine wave with a fast pitch drop and a click
Kick hard A bigger pitch drop, a hard click and built-in distortion. For techno and harder styles. Bigger pitch drop, a hard click and built-in drive. Techno, gabber.
Kick 808 The long, booming kick of the classic Roland TR-808: a slow pitch fall and almost no click Slow gentle pitch fall and a long boom, almost no click
Kick FM A clangy, knocking kick made with FM (one wave bending another’s pitch). COLOR on the SRC tab picks its flavor. FM sine with a sweeping modulator: a clangy, knocking kick. NOISE COLOR picks the FM ratio.
Snare A tone for the drum body plus noise for the rattle of the snares Triangle body plus filtered noise
Snare 808 The classic TR-808 snare snap: two tones plus noise Two sine tones a little under an octave apart, plus noise. The classic snap.
Snare FM A metallic, tight snare made with FM, plus noise. COLOR changes both its body and its rattle. FM body plus noise: metallic and tight. NOISE COLOR sets both the FM ratio and the noise tone.
Clap A hand clap: three quick bursts of noise, like several people clapping Noise in three quick bursts
Rimshot A short, sharp knock, like a stick hitting the rim of a drum Short high triangle with a hard click
Closed hat, Open hat, Cymbal Metallic hi-hats and cymbal, made the way classic drum machines make them. A closed hat cuts off a ringing open hat, like a real hi-hat. Six detuned square waves plus noise through a high-pass filter. A closed hat cuts off a ringing open hat.
Hat noise A cleaner, more modern hat made only from bright noise High-passed noise only: a cleaner, more modern hat
Tom A tom drum: a tone that drops in pitch Sine with a pitch drop
Conga A shorter, higher drum. Presets for high and low congas and bongo. Higher, shorter sine with a small pitch drop. Presets for high and low congas and bongo.
Clave A very short high tone. Presets for wood block and rim click.
Shaker Noise with a soft attack. Presets for short, long and cabasa.
Cowbell The classic drum machine cowbell Two square waves through a band-pass filter
FM tone A tone made with FM (one wave bending another’s pitch). Good for basses, bells and metallic sounds. Two-operator FM, good for bass and bells
Noise Plain noise, shaped with the filter. For sweeps, risers and texture. Filtered noise only
Sample only No synth. Use with the SAMPLE tab.
Saw synth A bright, buzzy synth for basses, leads and pads. SWEEP detunes its two voices for a thicker sound. TUNE 0 is the note C. Two sawtooth waves for basses, leads and pads. SWEEP sets how far apart they are tuned. TUNE 0 is the note C.
Pulse synth A hollow, video-game-like synth. SWEEP adds a second voice an octave below. TUNE 0 is the note C. A square wave plus a square one octave below. SWEEP sets the level of the lower one. TUNE 0 is the note C.
Bass synth A deep bass synth with its own filter sweep (TUNE 0 is the low note C2). Presets: acid (squelchy), sub (deep and clean), reese (dark and growling). Two saws an octave lower (TUNE 0 is C2) through a resonant low-pass with an envelope. Presets: acid, sub, reese.
Input Your microphone, or an instrument plugged into your computer, played through the track. Each hit lets the input through for as long as DECAY on the SRC tab (127 means up to 8 seconds), shaped by the track’s filter, effects and other knobs like any sound. See below. Your microphone or line input, played through the track. Each hit opens the input for DECAY on the SRC tab (127 means up to 8 seconds), then the filter, drive, insert, envelopes, LFOs and sends shape it like any sound. See below.

Input machine. Choosing it asks for the microphone (allow it). Ideas: chop a held synth or guitar chord into a rhythm with a short DECAY on every step; run a voice or instrument through the filter with an LFO on CUTOFF; put one hit on step 1 with DECAY at 127 so the input passes through continuously into the delay and reverb. Pick the input device on the SAMPLE tab (Resample From: Input). Use headphones with a microphone, or the speakers feed back into it. There is a small delay between the input and what you hear, set by your computer and browser. Audio exports and stems leave this track silent, because they are made from the pattern, not recorded live. To capture the input, use Resample (section 5) instead.

Any machine can play melodies (section 14), but the two synth machines and FM tone are made for it.

The Preset menu offers a few starting points per machine. “Machine default” resets the sound-shaping knobs. Presets leave volume, pan, sends, sample and LFO settings alone.

Copy sound and Paste sound move a whole sound (machine, every knob, LFOs) to another track.
Add to sound pool stores it for sound locks (section 8).

SRC tab: the source

Knob Does Under the hood
TUNE Pitch in semitones, -24 to +24
SWEEP How far above its normal pitch the sound starts, before it drops (the “pew” of a kick or tom). On FM tone: how much FM, which means how bright and metallic it sounds. How far the pitch starts above its resting note. On FM tone: how much FM.
SW TIME How long that drop takes. On FM tone: how fast the brightness fades. How long the sweep takes. On FM tone: how fast the FM fades.
DECAY How long the tone rings How long the tonal part rings
NOISE How much noise (hiss) is mixed in Level of the noise layer
N DECAY How long the noise lasts How long the noise rings
COLOR Brightness of the noise. On FM tone: its flavor, in eight steps from mellow to clangy. Brightness of the noise. On FM tone: the modulator ratio (eight steps).
SNAP How loud the click at the very start of the hit is Level of the attack click

FLTR tab: filter and dirt

Knob Does Under the hood
TYPE OFF, LP (low-pass: keeps the lows, for darker sounds), BP (band-pass: keeps the middle, for thin or nasal sounds), HP (high-pass: keeps the highs, for thinner sounds) OFF, LP (low-pass), BP (band-pass), HP (high-pass)
CUTOFF Where the filter cuts. Only heard when TYPE is not OFF. Filter frequency. Only heard when TYPE is not OFF.
RESO Resonance: a ringing, whistling boost at the cutoff Resonance
ENV Makes the filter sweep on every hit. Positive starts bright and closes (a “wow”), negative the reverse. Filter envelope amount. Positive starts bright and closes, negative the reverse.
ENV DEC How long that sweep takes How long the envelope takes
DRIVE Distortion, for grit and loudness Overdrive before the filter
CRUSH Makes the sound crunchy and lo-fi, like an old sampler or video game Bit depth reduction
SR REDUCE Makes the sound grainy and metallic, like a low-quality digital recording Sample rate reduction

INSERT tab

Knob Does Under the hood
EQ LOW Turns the bass down or up (up to 15 dB either way) Low shelf, cut or boost up to 15 dB
EQ HIGH Turns the treble down or up (up to 15 dB either way) High shelf, cut or boost up to 15 dB
RING FREQ Pitch of the ring modulator, an effect that makes sounds bell-like, metallic or robotic Ring modulator frequency
RING MIX How much ring modulator. 0 is off. Ring modulator amount. 0 is off.

AMP tab

Knob Does
ATTACK Fade-in time
DECAY How long the whole sound lasts. 127 leaves it up to the DECAY knobs on the SRC tab.
VOLUME Track level
PAN Left to right
ACCENT How much louder accented steps play on this track
DLY SEND Amount sent to the delay
REV SEND Amount sent to the reverb
MOD SEND Amount sent to the chorus, flanger or phaser

ENV tab: fuller envelopes

Knob Does
F ATTACK How long the filter takes to sweep from CUTOFF to the ENV peak. 0 jumps straight there (the classic drum snap).
ENV DEC How long the sweep takes to come back down (the same knob as on the FLTR tab)
F SUSTAIN Where the sweep settles. 0 goes all the way back to CUTOFF; 127 stays at the peak.
F RELEASE How long the filter takes to close after the note ends. Only used on steps with a LENGTH.
ATTACK Volume fade-in (same knob as on the AMP tab)
HOLD Stay at full volume this long before the decay starts. Good for gated sounds and long samples.
DECAY Volume fade-out (same knob as on the AMP tab)
CURVE Shape of the volume decay. EXP dies away naturally; LIN holds its body longer and then drops off.

The filter envelope needs a filter (TYPE on the FLTR tab not OFF) and some ENV amount. The display shows the volume envelope with HOLD and CURVE drawn in.

5. Samples

Every track can layer a sample on top of its synth voice. For a sample alone, choose the Sample only machine.

On the SAMPLE tab:

  1. Press Load audio files (or drop files on the panel). Files go into the next free slots. There are 16.
  2. The track is pointed at the first new sample and plays it.
Knob Does
SAMPLE Which slot plays. OFF for none.
TUNE Sample pitch in semitones
START, END The part of the sample that plays. The waveform shows it lit.
LOOP Repeat the START to END region
REVERSE Play backwards
LEVEL Sample level

The row under the knobs manages slots: pick a Slot, then Play it, Use on this track, rename it in the text box, or Delete it.

Slice across track cuts the track’s sample into 4, 8, 16 or 32 equal parts and places them along the track as steps, each with its own START and END lock. This replaces the track’s steps.

Resample records the machine itself into the next free sample slot, like sampling your own beat:

Control Does
From Main output (everything you hear), one Track on its own (before its delay, reverb and mod sends), or Input (mic or line)
Length 1 or 2 patterns, 4 to 64 steps, or 1 to 30 seconds. Up to 60 seconds in all.
Start At pattern start: begins exactly on step 1 of the next time round (if stopped, it starts playback and records from the top). Now: begins at once. When sound starts: waits until the level reaches STARTS AT, then records from that exact moment.
Record Starts it. While waiting or recording the button says Cancel.

The recording is brought up to full level, saved as “Rsmp main 1”, “Rsmp T3 2” and so on, and kept in the browser like any loaded sample. Use it with SAMPLE on any track, Use on this track, or Slice across track to chop it into steps. Because “At pattern start” lands exactly on the beat, a one-pattern recording loops and slices cleanly.

Sampling from a microphone or line input

Choose Input (mic or line) under From. The browser asks for permission to use the microphone the first time; allow it. A second row appears:

Control Does
Device Which input: the built-in microphone, an audio interface, a USB mic. Names show after permission is given.
Level meter How loud the input is. Aim for the top third without reaching the end.
Monitor Hear the input through the speakers. Use headphones with a microphone, or it will feed back.
Starts at The level that starts a When sound starts recording. Lower catches softer sounds, but also room noise.

Choosing Input sets Start to When sound starts and Length to 2 seconds, which suits one-shot hits: press Record, then hit the drum or make the sound. To record over your beat, pick At pattern start and a pattern length instead. Recordings are brought up to full level and named “Input 1”, “Input 2” and so on.

The browser’s voice processing (echo cancelling, noise removal, automatic level) is turned off, so drums and instruments come through as they are. The input closes when you leave the SAMPLE tab. It works in Chrome, Edge, Firefox and Safari.

SAMPLE can be locked per step, so one track can play a different sample on every step.

Samples are kept in this browser. They survive a reload. To take them to another browser or computer, use
Download project file (section 16), which packs them in with the project.

A looping sample with AMP DECAY at 127 rings for 8 seconds per hit. To make it shorter, lower AMP DECAY or set a LENGTH on the step (TRIG tab).

6. The sequencer

  • Click a pad to add or remove a hit. Drag to paint.
  • Key (above the grid) opens a legend of every look a step can have: accents, locks, conditions, trigless locks, step mutes, the playhead, selected steps and more.
  • Each track has up to 64 steps in four pages of 16. The page buttons switch pages. A yellow ring on a page button shows where the active track’s playhead is.
  • Track knobs. Every track row has four small knobs and a level bar, so you can shape every drum without opening its tabs. Each machine starts with the four controls that matter most for it (a kick gets TUNE, DECAY, SWEEP and SNAP; a hi-hat gets DECAY, COLOR, TUNE and PAN; the synths get CUTOFF, RESO, F ENV and DECAY). Click a knob’s name to give it a different job: pick any control from the list, or type to find one. “Use for every … track” changes that knob on every track with the same machine. “Back to defaults” restores the machine’s four. The choices are saved with the project and with kits. Drag a knob up or down, scroll on it, or use the arrow keys; double-click returns it to the machine’s default. Drag the level bar sideways. These knobs always change the whole track.
  • Show on each track: Name, Knobs, Level and M S switch those parts of the rows on and off, to make room.
    32 steps shows two pages of steps at once. Your choice stays for this browser.
  • Control all: while it is on (or while you hold Alt, Option on a Mac), turning a sound knob, on a track row or in the panel, moves that knob on all twelve tracks by the same amount. Great for pulling every decay shorter or every reverb send up at once.
  • M mutes a track. S solos it. With any solo on, only soloed tracks play.
  • Mutes (above the grid) turns on mute mode: while it is on, clicking a track name mutes or unmutes that track instead of selecting it. Track names get a dashed outline as a reminder.
  • Swing pushes every second step a little late, for a shuffle or groove. 50% is straight, 80% is a heavy shuffle, and 67% is a triplet feel. Single steps can be swung or kept straight on the PARTS tab.
  • Fill: steps whose condition is FILL play only while fill is on. Three ways to turn it on:
  • Fill: hold the button (or F). On while held. The button also lights whenever fill is on for any reason.
  • Cue: fill for exactly one whole pattern cycle, starting the next time the pattern starts from step 1. Cue outlines yellow while it waits and lights during the fill cycle. Pressed while stopped, the first cycle after Play is the fill.
  • Latch (or Shift+F): fill stays on until you press it again.
  • Copy page and Paste page copy the 16 steps on screen for the active track. Paste onto another page, another track or another pattern. Pasting onto a later page lengthens the track to include it.
  • Clear track empties the active track. Clear next to the pattern buttons empties the pattern.

7. Parameter locks

A lock pins a knob value to one step.

A label in the sound panel always says what the knobs change: “Knobs change: the whole track”, or, in yellow with a yellow frame around the panel, “Knobs change: step 5 only”.

  1. Select a step. With a mouse: Shift + click the pad, right-click it, or click and hold it. On a touch screen: press and hold the pad. Or turn on Select steps above the grid: while it is on, every tap or click picks a step (tap again to drop it) instead of adding or removing hits. This is the easiest way on a phone or tablet. Shift + click more pads to select several at once.
  2. The label turns yellow. Turn any knob on any tab. It turns yellow: locked to those steps.
  3. Double-click a knob to remove its lock. Clear locks removes all locks on the selected steps.
  4. Press Esc or Done to leave step editing.

You can lock every sound knob, every sample knob, every LFO knob, and the knobs on the DELAY, REVERB, MOD FX and MASTER tabs. Effect locks apply for that one step, then the effects return to normal.

Example: put hits on all sixteen steps of a hat track, then lock a few steps to a higher TUNE and a shorter DECAY. The same hat now has an accent pattern built in.

8. Per-step settings (TRIG, CHANCE, RETRIG, PARTS)

Select a step first. The knobs on these four tabs then belong to that step.

TRIG tab: what the step plays

Knob Does Under the hood
TYPE NOTE plays a hit. LOCK plays nothing new: instead it changes the sound still ringing from an earlier hit on this track (tune, cutoff, resonance, volume, pan, sends, crush, EQ). Use it to bend a long note partway through. NOTE plays a hit. LOCK is a trigless lock: it plays nothing new, but changes the sound still ringing on this track (tune, cutoff, resonance, volume, pan, sends, crush, EQ).
VELOCITY How hard the step plays, 1 to 127
ACCENT ON plays louder, by the track’s ACCENT amount on the AMP tab
NUDGE Micro timing: move the step earlier (negative) or later, in 24ths of a step
LENGTH Cut the note after this many steps (in quarter steps). FULL lets it ring.
SLIDE On a LOCK step: glide instead of jump. On a NOTE step: the ringing sound glides toward the next note’s tune, cutoff, resonance, volume and pan.
CHORD Stacks extra notes on the step: major, minor, sus 2, sus 4, major 7, minor 7, dominant 7, diminished, fifth, octave, minor 9. OFF plays a single note.
SOUND Play this step with a different sound from the sound pool (below) instead of the track’s own sound, so one track can play a kick on one step and a clap on the next. TRACK means use the track’s sound. Sound lock: play this step with a whole sound from the pool instead of the track’s sound. TRACK means off.

Under the TRIG knobs is the sound pool row: choose a pool slot, Play it, Load to this track,
Replace with this track, rename it, or Delete it. Add sounds with Add to sound pool in the panel header. The pool has 64 slots per project. Sounds from the library (SOUNDS tab) can be copied into it too.

PARTS tab: which parts of the hit play

Each step can switch parts of its hit on and off. A step with any part off gets the same corner mark as a step with chance settings.

Knob Does
SYNTH OFF: the oscillator, noise and click do not play, only the sample layer. Use it to drop a sample over a running synth line.
SAMPLE OFF: the sample layer does not play, only the synth
FLT ENV OFF: no filter sweep on this step, the filter sits at CUTOFF
LFO RESTART OFF: the LFOs carry on from the last hit instead of starting again (for LFOs in TRIG or HOLD mode)
SWING AUTO: swung if it is an even-numbered step (2, 4, 6 …), the usual rule. SWING: always swung. STRAIGHT: never swung. Use it to swing only the hats, or to keep a ghost note dead on the grid.

With SYNTH and SAMPLE both off, the step plays nothing new, but its locks change the sound that is still ringing (like a LOCK step on the TRIG tab).

CHANCE tab: whether the hits play

The CHANCE tab has two rows. This track works on every hit of the track, with or without a step picked.
Picked steps works on the steps you pick.

Knob Row Does
TRK PROB This track The chance that each hit on the track plays. 100% leaves them alone, 0% silences the track. A quick way to thin a part out.
VEL RND This track Random velocity on every hit, for a human feel
TIME RND This track Random timing on every hit, up to a quarter step early or late
Knob Row Does
PROB Picked steps Probability that the step plays
CONDITION Picked steps See the table below
LOGIC Picked steps AND, OR or XOR: how PROB and CONDITION work together (explained below)
LOCK CHANCE Picked steps How often the step’s locks apply. Below 100%, the step sometimes plays plain, with the track’s normal sound and no effect locks.
STEP MUTE Picked steps MUTED keeps the step and its locks in place but silences it. The pad turns striped.

Conditions:

Condition The step plays Under the hood
ALWAYS Every time
FILL Only while Fill is held
!FILL Only while Fill is not held
PRE Only if the previous step with a chance or condition on this track played Only if the last conditional step on this track played
!PRE Only if that previous step did not play Only if the last conditional step on this track did not play
1ST Only the first time through the track
!1ST Every time except the first
A:B (1:2 up to 8:8) On pass A of every B passes. 1:2 is every other time, starting with the first. 2:2 is every other time, starting with the second.
NEI Only if the latest step with a chance or condition on the track above played (“neighbor”) Only if the last conditional step on the track above played
!NEI Only if that step on the track above did not play Only if the last conditional step on the track above did not play

How chance works

Three things decide whether a step plays:

  1. The step’s PROB, multiplied by the track’s TRK PROB (both on the CHANCE tab). A step at 50% on a track at 50% plays one time in four.
  2. The step’s CONDITION.
  3. The step’s LOGIC, which says how the first two combine:
  4. AND: the condition must be true and the dice must come up. This is the default.
  5. OR: either is enough. For example, “always on Fill, otherwise 30% of the time”.
  6. XOR: exactly one of them. For example, “1:2 with 50%”: on the pass where it would normally play it sometimes drops out, and on the other pass it sometimes sneaks in.

With PROB at 100% the dice are not rolled, so OR and XOR behave like the plain condition. PRE and NEI look at whether the earlier step really played, so you can make parts answer each other: for example, a hat that only plays when the snare’s ghost note did not.

Once a step is going to play, two more dice can be rolled: LOCK CHANCE (do its locks apply this time?) and RT CHANCE on the RETRIG tab (does it repeat this time?).

RETRIG tab: repeats

Knob Does
RETRIG Repeat the step this many times (x2 to x8), for drum rolls and stutters. ALWAYS keeps repeating for the whole note: its LENGTH (TRIG tab), or up to the next hit on the track if LENGTH is FULL.
RATE Spacing of the repeats, from 1/1 (a whole bar) to 1/80, in order: 1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/12, 1/16, 1/20, 1/24, 1/32, 1/40, 1/48, 1/64, 1/80
FADE Below zero the repeats fade out. Above zero they fade in.
RT CHANCE How often the repeat happens. Otherwise the step plays once.

9. Track settings (Setup button, TRACK tab)

Knob Does
LENGTH Steps in this track, 1 to 64. Give tracks different lengths and they drift against each other, so the beat keeps shifting (a polymeter).
SPEED 1/8x to 2x. A 2x track runs through twice while a 1x track runs once.
EUCLID Spreads this many hits evenly over the track. Turning it rewrites the track’s steps. (Two generators: EUCLID tab.)
ROTATE Shifts every step of the track left or right, locks included
DIRECTION FORWARD, REVERSE, PING PONG (forward then back), or RANDOM (a random step each time)

EUCLID tab: two euclidean generators

A euclidean generator spreads a number of hits as evenly as it can over the track. Many traditional rhythms from around the world come out this way, so it is a quick way to get a groove that feels natural.

Knob Does
PULSES 1 Hits of generator 1, spread as evenly as possible over the track LENGTH (3 over 8 gives the tresillo x..x..x.)
ROTATE 1 Shifts generator 1
PULSES 2 Hits of generator 2
ROTATE 2 Shifts generator 2
COMBINE OR: hits from both. AND: only where both hit. XOR: where exactly one hits. 1 NOT 2: generator 1 with generator 2’s hits taken out.

Each track has its own settings, per pattern. Turning any knob rewrites which steps are on; steps that stay on keep their locks and settings. Change LENGTH on the TRACK tab, then turn a knob here to respread.

10. LFOs

Each track has three LFOs (tabs LFO 1, LFO 2, LFO 3). A yellow line under a tab means that LFO is doing something.

Knob Does Under the hood
SPEED Rate. Negative runs the wave backwards.
MULT Multiplies the speed. When SPEED times MULT is 128, the LFO takes exactly one bar per cycle. Multiplies the speed. SPEED times MULT equal to 128 is one cycle per bar.
WAVE TRI, SIN, SQR, SAW, EXP, RMP (ramp), RND (random steps)
DEPTH How far it moves the destination, in either direction
DEST Which knob it moves. NONE is off.
MODE FREE runs all the time. TRIG starts over on each hit. HOLD picks a value at each hit and keeps it until the next. ONE runs one cycle per hit, then stops. HALF runs half a cycle per hit. FREE runs continuously. TRIG restarts on each hit. HOLD freezes its value at each hit. ONE runs one cycle per hit then stops. HALF runs half a cycle.
PHASE Where in the wave it starts
FADE Below zero fades the LFO in after each hit. Above zero fades it out.

To start: set DEST, then raise DEPTH.

TUNE, CUTOFF, VOLUME and PAN move smoothly while a hit rings. Every other destination is set once at the start of each hit, so the LFO changes it from one hit to the next (good for decay or noise level). CUTOFF only does something when the filter TYPE is not OFF.

FOLLOW tab

A follower makes one track react to another. Right after the SOURCE track hits, the follower pushes one of this track’s knobs, strongest at the moment of the hit and fading after it.

Knob Does
SOURCE The track to listen to. OFF disables the follower.
DEPTH How far to push, up or down
DEST Which knob to push
DECAY How long the push lasts after the source hits

Example: on a bass track, SOURCE the kick, DEST CUTOFF, DEPTH positive. Bass notes that land right after a kick are brighter than ones that land later. With DEST VOLUME and a negative DEPTH you get a ducking effect on that one track. The push is worked out when each note starts; it does not move a note that is already ringing.

11. Effects

There are three effects shared by all tracks: a delay (echoes), a reverb (room sound) and a modulation effect (chorus, flanger or phaser). Each track’s send knobs on the AMP tab set how much of it goes into each one. After them comes the master section, which shapes the whole mix.

DELAY tab

Knob Does Under the hood
TYPE DIGITAL: clean echoes. PING PONG: echoes bounce left and right. TAPE: like an old tape echo, with a slight wobble and warmth, each repeat darker than the last. BBD: like a vintage analog delay pedal, darker and grittier at long times, and the pitch bends when you change TIME. DUB PONG: dark, warm echoes bouncing left and right. DIGITAL (clean), PING PONG (bounces left and right), TAPE (wow, flutter, saturation, darkening repeats), BBD (bucket brigade: darker and grittier at long times, pitch bends when the time changes), DUB PONG (dark saturated ping pong)
TIME In sixteenth notes, following the tempo
FEEDBACK How many repeats. On the TAPE and BBD types, high settings make the echoes build up and howl by themselves, a classic dub effect. Turn it down to stop it. Number of repeats. High settings self-oscillate on the tape and BBD types.
TONE Brightness of the repeats
WOW How much the echoes wobble in pitch (TAPE, BBD and DUB PONG) Pitch wobble (tape, BBD, dub)
WIDTH Stereo spread
TO REVERB Sends the delay into the reverb
LEVEL Delay return level

REVERB tab

Knob Does
TYPE ROOM, HALL, PLATE, GATED (flat then cut, the 80s drum sound), REVERSE (swells)
DECAY Length
PREDELAY Gap before the reverb starts
TONE Brightness
SHIMMER Adds a sparkling, higher copy of the reverb (an octave up), for a glowing, airy tail
LEVEL Reverb return level

MOD FX tab

Knob Does Under the hood
MOD TYPE CHORUS (thickens, like several players at once), FLANGER (a jet-plane swoosh), PHASER (a swirling sweep) CHORUS, FLANGER, PHASER
MOD RATE Speed of the sweep
MOD DEPTH Width of the sweep
MOD FDBK Makes the flanger and phaser sharper and more intense Feedback (flanger and phaser)
MOD LEVEL Return level

FX LFO tab

One LFO for the shared effects and the macros. It runs while the pattern plays.

Knob Does
SPEED, MULT, WAVE, PHASE As on the track LFOs
DEPTH How far it moves the destination
DEST Which knob it moves. Any of the four macros (the LFO then sways every knob that macro moves, on every track), or an effect knob: delay time, feedback, tone, wow, width, to reverb, level; reverb predelay, tone, shimmer, level; mod rate, depth, feedback, level; master drive, duck amount, duck release, compressor threshold and mix

It moves the knob once per step and glides smoothly in between. Aimed at delay TIME on the TAPE or BBD type, it bends the pitch of the echoes.

MASTER tab

Knob Does
DRIVE Overdrive on the whole mix
DUCK SRC OFF, or the track that ducks the rest. Each time that track hits, everything else dips in volume for a moment, which makes it punch through (often the kick).
DUCK AMT How deep the dip is
DUCK REL How fast it recovers

COMP tab: master compressor

Knob Does Under the hood
THRESHOLD How loud the mix must get before the compressor starts turning it down (in dB). Lower means it works more often. Level in dB where squashing starts. Lower squashes more.
RATIO How hard it turns down anything above the threshold, from 1 (not at all) to 20 (a lot) How hard it squashes above the threshold, 1 (not at all) to 20
ATTACK How fast it grabs, in milliseconds. Longer lets drum hits punch through.
RELEASE How fast it lets go, in milliseconds
MAKEUP Gain after the compressor, in dB, to win back the level it took
MIX 100 is fully compressed. Lower blends in the untouched mix, which keeps the punch while adding weight (often called parallel or “New York” compression). 100 is fully compressed. Lower blends in the untouched sound (parallel or “New York” compression).

A compressor makes the loud parts quieter, so the mix sounds tighter and fuller. The GR meter on the display shows how much it is turning the mix down right now (in dB).

12. Patterns, songs and pattern settings

Pattern buttons 1 to 8: when stopped, a pattern button switches at once. While playing, what happens depends on the menu next to the buttons:

Setting While playing, pressing a pattern button
END OF PATTERN Waits for the current pattern to finish (the button blinks), then switches
DIRECT START Switches at once and starts the new pattern from step 1
DIRECT JUMP Switches at once and carries on from the same position, as if the new pattern had been playing all along
TEMP JUMP Like DIRECT JUMP, but when the new pattern reaches its end it goes back to the one you came from. Good for a one-off fill or break. The display shows “back to” and the pattern it will return to.

Shift + click a pattern button always does DIRECT START.

  • Save stores a restore point for the current pattern: its steps and the sounds it uses. A small dot appears on that pattern’s button. Reload takes the pattern back to that point, even while it is playing, so you can pull a pattern apart live and snap it back in one press. Reload can also be undone.
  • Copy / Paste / Clear act on the whole current pattern.

Songs

A song is a list of rows played in order. Each row is a small card:

Part of a row Does
Number The row’s place in the song. Yellow ring: the row playing now.
Pattern (P1 to P8) Which pattern the row plays
Repeats (x1 to x16) How many times the pattern plays before the next row
bpm A tempo for this row only. Leave it empty to use the pattern’s own tempo.
< and > Move the row earlier or later
x Remove the row
1 to 12 Tracks to mute during this row (orange is muted). Changes apply at once if the row is playing.

To build one: pick a pattern with the pattern buttons, press Add row, repeat. Then press Song and Play: the song starts from row 1. Loop on starts it again after the last row; Loop off stops playback at the end.
Clear removes every row.

Pressing a pattern button while a song plays leaves the song and carries on with that pattern. Row mutes add to the normal mutes; they never unmute a track you muted yourself.

PATTERN tab

Knob Does
PTN TEMPO This pattern’s own tempo. PROJECT follows the main Tempo slider.
PTN SWING This pattern’s own swing. PROJECT follows the main Swing slider.
KIT PROJECT uses the shared sounds. OWN gives this pattern its own copy of every track’s sound, mutes included. Turning it back to PROJECT discards that copy.
MUTES PROJECT: mutes stay as they are when you change pattern. OWN: this pattern remembers its own mutes, so switching patterns can bring parts in and out.
SCALE The scale for the whole project: chromatic, major, minor, dorian, phrygian, two pentatonics, blues. It lights the piano roll and keyboard and guides Dice notes. The root is each track’s own TUNE.

13. Performance pads, scenes and macros

The 12 pads

The row of 12 pads under the transport is for playing live. Perf, Scene and Tracks choose what they do.

Tracks: the pads play tracks 1 to 12, like drum pads, and show each track’s machine. They are velocity sensitive: hit near the top of a pad for loud, near the bottom for soft (with a pen or a pressure screen, real pressure). With Rec on they record, with Step on they step-record, both at the velocity you played.

Perf (performance pads): each pad pushes a set of knobs, on any tracks and on the effects, while you hold it. How far depends on how hard you press:

  • With a mouse or trackpad, press higher up the pad for more, lower down for less, and slide up or down while holding to change it. The yellow fill shows how much.
  • With a pen, or a touch screen that reports pressure, real pressure is used.
  • Several pads can be held at once (touch screens). Their pushes add up.
  • Latch keeps a pad at its amount after you let go. A quick tap on a lit pad releases it.

Scene (scene pads): each pad holds a set of knob values that replace the normal ones while the scene is on. A tap switches a scene on and leaves it on; tap it again to switch it off. Hold a scene pad instead and it is only on while held, then the previous scene comes back. One scene is on at a time.

Both kinds also bend sounds that are already ringing (tune, cutoff, resonance, volume, pan, sends, crush, EQ), so a held synth note opens up as you press. Other knobs change from the next hit.

A small orange dot on a pad means it has knobs in it. Two performance pads and two scenes come set up in the demo so you can try them.

Setting up a pad

  1. Press Edit. Choose Perf or Scene, then press the pad to set up. It stays lit so you hear it.
  2. Turn any knob, on any tab and any track: sound knobs, LFO knobs and effect knobs all work. Pick other tracks with their names or keys as you go.
  3. For a performance pad, turn the knob to where it should land when the pad is pressed fully.
  4. For a scene, turn it to the value it should jump to.
  5. Knobs that belong to the pad turn yellow. Double-click one to take it out. Clear locks empties the pad.
  6. Press Done, Esc, or Edit again to finish.

Scenes win over everything, including a step’s own locks. Performance pads add on top of whatever the knob would otherwise be.

Quick knob

The slider at the right end of the pads bar drives one macro, chosen in the menu next to it. It is the same value as that macro’s knob on the MACRO tab, so set up the macro’s targets there, then play it from here without leaving the tab you are on. With MIDI Learn a control on, touch the slider and turn a knob on your controller to bind it.

Macros

A macro is one knob that moves many knobs.

  1. Touch a sound knob on any tab (for example CUTOFF on track 4).
  2. Go to the MACRO tab. The bottom row (M1 AMOUNT to M4 AMOUNT) sets how far each macro pushes the knob you just touched. The help line names it.
  3. Repeat with other knobs and other tracks to add more targets.
  4. The top row (MACRO 1 to MACRO 4) are the macro knobs. Changes apply from the next hit.

Double-click an AMOUNT knob to remove that target.

Snapshots store the four macro values. Set the macros, press Store, then a number 1 to 8. Click a stored snapshot to recall it.

Morph slides between two stored snapshots: choose one on each side of the slider and move it. All four macros glide from the first snapshot’s values to the second’s. It needs at least two stored snapshots.

14. Melodies: piano roll, keyboard, live recording

Every step can have its own pitch, and with CHORD on the TRIG tab a step can play a whole chord. A melody is a row of steps whose TUNE is locked to different values. TUNE runs four octaves, from -24 to +24.

Piano roll

Press Piano roll above the grid. The grid is replaced by a roll for the active track: pitch up the side, the 16 steps of the current page across.

  • Click an empty cell to place a note there. It replaces any other note on that step.
  • Click a note to remove it.
  • Drag a note up or down to change its pitch, or sideways to move it to a free step.
  • A step with a CHORD (TRIG tab) shows its extra notes fainter above the main one.
  • Drag to the right while placing a note to make it longer. This sets the step’s LENGTH.
  • Shift + click or right-click a note to select its step, then use any knob to lock other settings to it.
  • Up and Down move the view by an octave. A small mark at the top or bottom edge means a note lies beyond the view.
  • Rows in the scale are lighter, and the root rows are lightest with a yellow name.
  • An orange edge on a note means it is accented. Fainter notes have lower velocity.
  • The VEL strip under the notes shows each note’s velocity as a bar. Click in it to set a velocity, or sweep across it to draw a curve over several notes.
  • The CHANCE strip below that does the same for each note’s chance, in steps of 5%. Bars below 100% are yellow.

Press Piano roll again to return to the grid. Both views show the same steps.

Keyboard

A two-octave keyboard appears under the piano roll, and whenever keys mode is on. Click or tap a key to play the active track at that pitch. Oct – and Oct + shift it. Keys outside the scale are faded. With Rec on and the pattern playing, each key you play is written into the pattern.

Live recording and keys mode

Rec (or R): while playing,

  • pressing a track key (or clicking a track name) plays that track and writes the hit on the nearest step, keeping how early or late you were;
  • turning a sound knob writes locks at the playhead instead of changing the track’s sound. On empty steps it creates trigless locks.

Keys (or Q): the home row plays the active track in semitones, like a piano:

 W E   T Y U
A S D F G H J K

Z and X shift down and up an octave. With Rec on, notes are recorded with their pitch as TUNE locks. While keys mode is on, the F key plays a note and no longer holds Fill.

Quant (next to Rec): how far live-recorded hits are pulled onto the grid. Off keeps your timing exactly (as NUDGE on the step), 100% puts every hit right on the step, 50% and 75% tighten it but keep some feel.

Step recording

Step (or Shift+R) works while stopped. A dashed cursor appears on the active track. Each track key, track name click, MIDI note or keyboard note writes a hit at the cursor (with its pitch, in keys mode) and moves the cursor one step on. A track key for another track switches to that track first.

  • Right arrow skips a step (a rest), Left arrow goes back one.
  • Backspace or Delete erases the step at the cursor and moves on.
  • If a step is selected when you turn Step on, the cursor starts there.

Click track and count-in

Click plays a blip on every beat, higher on the first beat of each bar. Next to it:

  • the time signature: 4/4, 3/4, 5/4, 7/4 (a beat is four steps) or 6/8, 7/8, 9/8, 12/8 (a beat is two steps). Bars count from when you press Play, not from the pattern, so a 3/4 click over a 16 step pattern drifts against it on purpose;
  • count-in: 1 or 2 bars of click before playback starts, used only when you press Play with Rec on (the display shows “count-in”);
  • the click volume.

The click goes straight to your speakers. It is never in exports, stems or resampling, and the effects do not touch it. Click, count-in, volume and Quant are saved in this browser, not in the project.

14b. MIDI: keyboards, pad controllers and knob boxes

Open MIDI below the machine and press Turn MIDI on. The browser asks for permission once.

MIDI works in Chrome, Edge and Firefox. Safari does not support MIDI, so on a Mac use Chrome for it.

Notes: choose how notes are used with the Notes menu.

Setting What notes do
Pads from C1 (36) Notes 36 to 47 trigger tracks 1 to 12, which suits most pad controllers. Every other note plays the active track at that pitch.
Notes 0 to 11 trigger tracks As on the Rytm: notes 0 to 11 trigger tracks 1 to 12, notes 12 and up play the active track at that pitch.
Every note plays the active track A keyboard plays the active track melodically

Velocity is used. With Rec on and the pattern playing, notes are recorded with their timing, velocity and pitch. Input and Channel narrow what is listened to.

Program change 0 to 7 selects patterns 1 to 8, following the pattern change menu.

Knobs on your controller: press Learn a control, turn a knob on screen (any tab, any track) or press a performance pad, then move a knob or slider on your device. They are now linked: the control moves that knob over its whole range, including bending notes already ringing. Learn binds one control at a time.
Clear all bindings removes them all. Bindings belong to this browser, not to the project, because they follow the controller on your desk.

Clock:

  • Follow clock and start/stop in: another device or your music software sets the tempo and starts and stops the machine. It follows closely, but it can drift slightly from the other device over a long time.
  • Send clock and start/stop out: other gear follows this machine.

15. Generative tools

  • Dice > Notes: gives the track’s steps (or the selected steps) random pitches from the project scale, leaning toward the root. Pair it with Dice track for an instant bass line.
  • TRK PROB, VEL RND and TIME RND on the CHANCE tab, and DIRECTION RANDOM on the TRACK tab (Setup).
  • Dice > Track: rolls a new part for the active track, with chance, conditions and the odd retrig mixed in.
  • Dice > Locks: sprinkles parameter locks from the tab you are on over the track’s steps. With steps selected, it only touches those.
  • EUCLID and ROTATE on the TRACK tab (Setup).
  • CHANCE and CONDITION on steps, and LFOs with the RND wave, keep a pattern changing by itself.

All of these can be undone.

16. Saving, undo and moving projects

  • The project you are working on saves itself in the browser a moment after every change.
  • Undo and Redo (buttons, or Ctrl/Cmd + Z and Shift + Ctrl/Cmd + Z) step back through 80 changes.

Projects (the panel at the bottom of the page):

  • Save as: type a name and press it to keep a copy under that name. Saving again with the same name replaces that copy. Keep as many as you like.
  • Open the one chosen in the list. What you had before is replaced, but Undo brings it back.
    Delete removes a saved copy (not the project you are working on).
  • Download project file saves a .zip with the project and every sample it uses inside. Open project file loads one, in this or any other browser or computer, samples included. It also opens a project saved as plain text (.json).
  • Saved projects and samples live in this browser. Clearing the browser’s site data removes them, so download project files of anything you want to keep.
  • The older way still works: Copy puts the project on the clipboard as text, and Load from text reads it. Text does not carry samples. Start over with the demo resets everything.

SOUNDS tab: kits and the sound library

Kits belong to the project. A kit is all twelve track sounds at once (machine and every knob).

  • Save sounds as new kit: stores the current twelve sounds. Type a name first, or it is called Kit 1, Kit 2 …
  • Load kit: puts the chosen kit’s sounds on the tracks. If the pattern has its own kit (PATTERN tab), they go there; otherwise they replace the project’s sounds. Patterns and steps are not touched.
  • Replace with current sounds, rename (type in the name box), Delete. Up to 64 kits.

The library is shared by every project in this browser. It holds single sounds.

  • Save this track’s sound to the library, with a name and tags (words like “kick, dark, 808”).
  • Search by any part of the name, tags or machine; several words must all match.
  • Play previews the chosen sound on the active track, Load to this track puts it there, Copy to pool
    adds it to this project’s sound pool, Delete removes it from the library.
  • A library sound that plays a sample remembers which one. Loading it into another project brings the sample along as long as it is still stored in this browser; otherwise the sound loads without it.
  • Download library saves it as a .zip (sounds only, no samples), and Add from file merges one in, so you can move your library between browsers or computers. Up to 1000 sounds.

17. Exporting audio

Below the machine:

  1. Choose how many times through (1, 2, 4 or 8). If Song is on, the song is rendered instead: that many times if Loop is on, once if it is off, with every row’s repeats, tempo and mutes.
  2. Render mix makes one stereo WAV. A player appears, with Save WAV.
  3. Render stems makes one WAV per track that has steps, plus the mix, and Save stems (zip).

Export MIDI writes a standard MIDI file of the current pattern on the drum channel, one note per step that would play, with velocity, accents, swing, nudge, retrigs and track speed. Chance is ignored (every chance step is written), Fill steps are left out, and conditions like 1:2 are worked out over the number of passes chosen. Kick is note 36, snare 38, clap 39, rimshot 37, closed hat 42, open hat 46, cymbal 49, tom 45, cowbell 56. FM tone, Sample only and the synth machines follow their TUNE. The export always reads steps forward and ignores TRK PROB, the humanize knobs and DIRECTION.

Three seconds are added at the end of audio renders for effect tails. Each stem includes its own delay, reverb and mod effect. Stems add up close to the mix but not exactly, because each passes through the master compressor separately. Chance and conditions are rolled as they would be live; all stems in one export share the same rolls.

18. Keyboard shortcuts

Key Does
Space Play or stop
1 to 9, 0, -, = Choose track 1 to 12 and hear it
Shift + a track key Mute or unmute that track
F (hold) Fill
Shift + F Fill latch on or off
R Live record on or off
Shift + R Step record on or off
Left, Right Move the step record cursor (step record on, stopped)
Backspace Erase the step at the step record cursor and move on
Q Keys mode on or off
A W S E D F T G Y H U J K Notes, in keys mode
Z, X Octave down, up, in keys mode
Esc Leave step editing
Shift + click a pad Select the step for editing (add to selection)
Shift + click a pattern Jump to it at once
Ctrl/Cmd + Z Undo
Shift + Ctrl/Cmd + Z Redo
Ctrl/Cmd + C, V Copy and paste the selected step, or the whole track when none is selected
Arrow keys on a knob Change by 1 (Shift: by 10)
Delete on a knob Reset it

19. Phones and tablets

It works at phone width: each track becomes one compact row with a short code for its machine (BD, SD, CH …), and the tabs become one row you swipe.

  • The M and S buttons are hidden to save room. Use Mutes above the grid, then tap track names.

  • Tap a pad to add a hit. Press and hold to select the step for editing. While a step is being edited, its knobs dock to the bottom of the screen with a bar of tabs (TRIG, CHANCE, RETRIG, PARTS, SRC, SAMPLE, FLTR, ENV, AMP, LFO 1, DELAY, REVERB) and a Done button, so the grid stays in view while you turn them. Editing a pad (Edit in the pads bar) docks them the same way.

  • Drag knobs up and down.
  • Tap a track name to choose it and hear it. With Rec on, that also records the hit.
  • The Keys button shows an on-screen keyboard (one octave on a phone), and the piano roll works by touch.
  • There is no touch way yet to copy and paste or to jump directly to a pattern.
  • The first tap on Play (or any sound) is what lets the browser start audio. On an iPhone, check the silent switch.

How to, next to the subtitle at the top, opens a short start-here guide. It also opens by itself the first time the page is visited in a browser.

20. Limits and troubleshooting

No sound. Click Play or a track name first: browsers only start audio after a click. Check the Volume slider, the track’s VOLUME knob, mutes and solos. On a phone, check the silent switch.

The crusher, the tape or BBD delay, or the shimmer reverb make no sound. These effects need a recent browser. Reload the page. If they are still silent, update your browser: current Chrome, Edge, Firefox and Safari all work.

A knob does nothing. CUTOFF, RESO and ENV need the filter TYPE to be something other than OFF. LFOs need both DEST and DEPTH. Sends need the effect’s LEVEL up. Macros need an AMOUNT on a target.

My samples are missing on another computer or browser. Each browser keeps its own copy of your samples. To move a project with its samples, press Download project file in the Projects panel, then Open project file on the other computer. Copy and Load from text move the beat but not the samples.

The timing stutters when I switch to another tab. Browsers slow down tabs you are not looking at, to save power. The drum machine is built to keep time anyway, but a laptop on battery saver or a very busy computer can still make it stutter. Keep its tab in front, or plug in, while you record or perform.

Known limits.

  • The delay, reverb and modulation effects are shared by all tracks, so each track can only change how much it sends to them, not have its own.
  • A LOCK step (one that changes a sound that is already ringing) cannot change that sound’s decay or its SRC tab settings. Those only change from the next hit.
  • If you lock the reverb TYPE or DECAY on a step, the change starts a moment before that step.
  • The ducking track (DUCK SRC) cannot be changed per step.